DTN-25气动点凸焊机 点凸焊机 凸焊机
供应商:昆山金吉港电器有限公司[查看公司详情]
所在地:昆山市昆山周市镇明达路100号
价格:9500.00元
经营模式:
联系人:高娟
产品简介
DTN气动式点凸焊机
Pneumatic
pointwelder
性能特点及用途
Performance feature and application
DTN系列气动式点凸焊机,可广泛用于汽车、航空、建筑、机械、金属制品、电器开关等行业,
可对各种碳钢、不锈钢有色金属的板材、线材进行高质量强焊或钎焊。
本机采用国际单片机及半导体无件,带程序控制箱确保点焊稳定可靠、,并设有单点/连续点焊功能。
DTN series Pneumatic
pointwelder,raised welder are widely used in
automobile,aviation,architecture,
mechanism and metal ware and wirintg switch fields,they are also used in jointing low carbon steel,
stainless
steel,and colored metal patch and thread with high quality,hard or braze
welding.
Adopt for singlechip with international famous brand.Computer
control box with programs,
which be sure point welding is reliable and stable quality,single pointand continuouspoint welder function.
技术参数parameter
规格 Spec | 单位 | DTN-25 | DTN-35 | DTN-50 | DTN-63 | |
初级电压Primary voltage | (V) | 380 | ||||
额定容量Nominal capacity | (KVA) | 25 | 35 | 50 | 63 | |
额定输入电流Rated the input current | (A) | 66 | 94 | 132 | 166 | |
额定负载持续率Rated load sustained rate | (%) | 20 | ||||
次级电压调节级数Secondary voltage regulating series | (V) | 无极调压 | ||||
次级空载电压Subprime no-load voltage | (mm) | 0.5-3.52 | 0.5-4.3 | 0.5-5 | 0.5-6.7 | |
电极臂伸出长度Electrode arm outstretched length | (mm) | 430 | ||||
电极臂间距离Electrode arm distance between | (mm) | 220 | ||||
上电极工作行程Electrode working travel | (N) | 25-100 | ||||
电极间压力Electrode between maximum pressure | (mm) | 5000 | ||||
电极尺寸 | 电极臂Electrode arm | (mm) | Ф60 | Ф60 | Ф60 | Ф60 |
电极握杆Electrode joy stick | (mm) | Ф25 | Ф25 | Ф25 | Ф25 | |
凸焊盘Convex pad | (mm) | 110*150 | 110*150 | 110*150 | 110*150 | |
焊接厚度 | 碳钢Low-carbon steel | (mm) | 2+2 | 2.5+2.5 | 3+3 | 3.5+3.5 |
不锈钢Tainless steel | (mm) | 0.8+0.8 | 0.9+0.9 | 1+1 | 1.2+1.2 | |
铝Aluminum | (mm) | 0.3+0.3 | 0.4+0.4 | 0.5+0.5 | 0.6+0.6 | |
压缩空气压力Compressed air pressure | (mpr) | 0.6 | ||||
压缩空气消耗量Compressed air consumption | (M2/h) | 12 | ||||
冷却水流量Cooling water flow | (L/min) | 6 | ||||
外型尺寸(长*宽*高)Shape相关产品推荐
|