首页 > 产品信息

静电喷塑面丝印移印油墨

供应商:上海凯贤印刷科技有限公司[查看公司详情]

所在地:上海市嘉定区沪宜公路6106号

价格:230.00元/千克

经营模式:生产加工

联系人:赵绿林

产品简介

 

  • 品牌:欧莱斯
  • ,
  • 型号:SPA
  • ,
  • 印刷方式:丝印移印
  • ,
  • 连接料:树脂油型
  • ,
  • 承印物:金属用油墨
  • ,
  • 干燥形式:自然干燥
  • ,
  • 颜色:不限
  • ,
  • 产地:德国
  • ,
  • 叠印性:
  • ,
  • 外观:膏状
  • ,
  • 含水量:0.22%
  • ,
  • 颗粒细度:99.99μm
  • ,
  • 粘度:100S
  • ,
  • 附着强度:100
  • ,
  • 稳定性:
  • ,
  • 流动性:0.0012mm
  • ,
  • 干燥时间:3-5min
  • ,
  • 渗透性:10μm
  • ,
  • 储存温度:22-23℃
  • ,
  • 包装规格:1008ml
  • ,
  • 保质期:48
  • ,
  • 适用范围:静电喷塑、粉末、涂装、喷粉、喷漆、烤漆
  • ,
  • 特性:单组份、免烘烤、自干。
  • ,
  • 特性1:高光泽、高色彩、高硬度
  • ,
  • 特性2:耐酒精、耐酸碱、耐汽油、抗腐蚀、耐紫外线
  • ,
  • 稀释剂/印刷方式:783/丝印、移印、喷涂
  • ,

  • 具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放。
     

    Oles MPE Plating Ink

    MPE plating strengthening series ink characteristics : mainly used in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fire, dark environment storage

    相关产品推荐

    氧化金属丝印油墨

    PP料免处理移印油墨

    PU皮革表面丝印油墨

    无卤素阳极氧化铝油墨

    PE料免处理移印油墨

    PET移印UV油墨

    PET丝印UV油墨

    温免烘烤自干陶瓷油墨

    耐正己烷PP油墨

    耐汽油尼龙油墨

    ABS电镀表面丝印移印油墨

    单组份免烘烤自干铝合金油墨

    耐高温阳极氧化铝油墨

    PP料免处理丝印油墨

    PE周转箱丝印油墨

    喷油表面丝印移印油墨

    静电喷塑面丝印移印油墨

    单组份自干氧化铝丝印移印油墨

    丝印阳极氧化铝油墨

    塑胶电镀丝印移印油墨